Reducer

A Pipe Reducer is the component in the piping system to connect two pipes with different sizes . The reducer length is usually equal to the average of the two pipe diameters. a pipe reducer can result the changing of the flow pressure. So the pipe reducers are commonly used to change the pipe size or pipe pressure in a piping system. Generally, the length of a reducer is short relative to its diameter. The length also can be changed if necessary as per the flow of fluid.

There are two kinds of pipe reducer: Concentric reducer and Eccentric reducer.

Concentric Reducers are used to join pipe or tube sections on the same centerline. They provide an in-line conical transition between pipes of differing diameters. Comparing to the eccentric reducer, the concentric type reducer is easier and low cost to produce.

An Eccentric reducer is manufactured with the smaller end and large end not in an axis, which allows the two ends align with one side. This reducer must be installed with straight side up so that it can prevent trapping air at the pump suction. The eccentric pipe reducers allow simple connection of different sized pipes.

China Pipe Reducer Manufacturer www.pipelinedubai.com supplies Pipe Reducers, Tubing Reducers, Reducer Pipe Fittings in all kinds of materials, such as carbon steel, stainless steel, alloy steel, etc.

Products List

ASME B16.5 ASTM B366 UNS N02200/UNS N02201 CON RED DN100-DN40 SCH80

Request a quote

UNS-N02200/UNS-N02201-CON-RED-DN100-DN40-SCH80

China Welding Neck Reducer Manufacturer www.pipelinedubai.com offers ASME B16.5 ASTM B366 UNS N02200/UNS N02201 CON RED, DN100-DN40, SCH80.

E.N 1.4539 Concentric Reducer DN100 – DN90 SCH40S

Request a quote

E.N-1.4539-Concentric-Reducer-DN100-DN90-SCH40S

China Concentric Reducer Manufacturer www.pipelinedubai.com offers E.N 1.4539 Concentric Reducer, DN100 – DN90, SCH40S.

ASME B16.9 ASTM B366 254SMO Concentric Reducer DN40 – DN15 SCH160

Request a quote

254SMO-Concentric-Reducer-DN40-DN15-SCH160

China Concentric Reducer Manufacturer www.pipelinedubai.com offers ASME B16.9 ASTM B366 254SMO Concentric Reducer, DN40 – DN15, SCH160.

ASME B16.9 ASTM A403 UNS S31603 Seamless Concentric Reducer DN300 – DN20……

Request a quote

UNS-S31603-Seamless-Concentric-Reducer-DN300-DN200-SCH10S

China Concentric Reducer Manufacturer www.pipelinedubai.com offers ASME B16.9 ASTM A403 UNS S31603 Seamless Concentric Reducer, DN300 – DN200, SCH10S.