Recently Shipment to Mid Asia Projects

How to get high quality pipe reducer?

What is a pipe reducer? A pipe reducer is the component in a pipeline that reduces the pipe size from a larger to a smaller bore (inner diameter). The length of the reduction is usually equal to the average of the larger and smaller pipe diameters. There are two main types of pipe reducer: concentric and eccentric pipe reducers. A pipe reducer can be used either as nozzle or as diffuser depending on the mach number of the flow. A pipe reducer allows for a change in pipe size to meet hydraulic flow requirements of the system, or to adapt […]

Recently Shipment to Mid Asia Projects

How to get high quality pipe nipples?

What is a pipe nipple? A pipe nipple is a fitting, consisting of a short piece of pipe, usually provided with a male pipe thread at each end, for connecting two other fittings. The length of the pipe nipple is usually specified by the overall length with threads. It may have a hexagonal section in the center for wrench to grasp (sometimes referred to as a “hex nipple”), or it may simply be made from a short piece of pipe (sometimes referred to as a “barrel nipple” or “pipe nipple”). A “close nipple” has no unthreaded area; when screwed tightly between two female fittings, very little […]

Recently Shipment to Mid Asia Projects

How to get high quality pipe olets?

What are pipe olets? Pipe olets are fittings which provide an outlet from a larger pipe to a smaller one (or one of the same size). The main pipe onto which the branch connection is welded is usually called the Run or Header size. The pipe to which the branch connection provides a channel is usually called the Branch or Outlet size. Branch connections are in all sizes, types, bores, and classes, in a wide range of stainless steel, chrome-moly, and other alloys. Types of pipe olets WELDOLET® is the most common of all branch connections, and is welded onto the outlet pipe. […]

Recently Shipment to Mid Asia Projects

How to get high quality pipe coupling?

What is a pipe coupling? Pipe coupling connect two pipes or tubes together of equal or differing sizes . Pipe coupling mainly aims to solve the existing couplings easily generated due to fatigue fracture stress concentration problems. Pipe coupling structure is: pipe ends with the inner wall of the coupling connected to tapered threads, couplings and tubing ends of the body with the same thread pitch flat with threaded connect. A single taper threaded connection with relief tubing outer thread root stress concentration characteristics, not easy to produce fatigue fracture, connecting effect. Effectively prevent oil well pipeline string broken off […]

Recently Shipment to Mid Asia Projects

How to get high quality pipe elbow?

What is a pipe elbow? A pipe elbow is a type of piping that is bent at an angle or curve to allow straight pipes to be joined at an angle. The pipe elbow can be made from a variety of materials, from brass or cast iron to steel, alloy or plastic, and they are often threaded to allow other pipes to be joined to them. These corner fittings are often used in plumbing applications, but they can be used for other applications as well. The size and shape of the pipe elbow depends entirely on the user’s needs, and the materials used […]

Recently Shipment to Mid Asia Projects

How to get high quality stainless steel pipes?

What is a stainless steel pipe? Stainless steel pipe is one of the more standardized materials in the building and engineering industries. Stainless steel pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow — liquids and gases (fluids), slurries, powders and masses of small solids. It can also be used for structural applications; hollow pipe is far stiffer per unit weight than solid members. In addition, engaging in bending, torsional strength of the same, lighter, and they are also widely used in the manufacture of mechanical parts […]

Recently Shipment to Mid Asia Projects

How to get high quality pipe cap?

What is a pipe cap? Pipe cap acts as protective device and are designed to protect pipe ends of various shapes. The main purpose of using pipe caps is to waterproof the connections. They are also used to close the the ends of hydraulic or pneumatic pipes and tubes. They are used in the plumbing apparatus of domestic, commercial and industrial water supply lines, machinery and processing equipment etc. They are also fitted on water pump lines with the sole purpose of removing air blocks. Pipe caps are highly demanded as an important category of pipe fittings. If a solvent-weld […]

Recently Shipment to Mid Asia Projects

How to get high quality pipe bend?

What is a pipe bend? Pipe bend is a type of pipe fitting product for any offset or change of direction in the piping systems. It signifies that there is a “bend” i.e,  a change in direction of the piping (usually for some specific reason) – but it lacks specific, engineering definition as to direction and degree. Bends are usually made by using a bending machine (hot bending and cold bending) on site and suited for a specific need. Use of pipe bends are economic as it reduces number of expensive fittings. Size range of pipe bend The bend is used […]

Recently Shipment to Mid Asia Projects

How to get high quality carbon steel pipes?

What is a carbon steel pipe? Carbon steel pipes are made of carbon steel ingot or solid round steel through perforated pipes and then made by hot rolling, cold rolling or cold rolling. What are the different types of carbon steel? Carbon steel is classified according to how much carbon has been mixed with the base element, iron. Ultra-high carbon steel is comprised of between 1% and 2% carbon. High carbon steel is .60%-.99% Medium carbon steel is .30%-.59% Low carbon steel is .16%-.29% Mild carbon steel is .05%-.15% Generally also contain small amounts of silicon, manganese, sulfur, phosphorus and […]

Recently Shipment to Mid Asia Projects

How to get high quality Stub Ends?

What are Stub Ends? Stub Ends are fittings used in place of welded flanges where rotating back up flanges are desired. They are also called Lap Joints and Vanstone Flared Laps. A rotating back upflange seats itself against the back surface of the Stub End. When bolts are added, the clamping action of the bolts presses the rotating back up flange against the back of the Stub End. When bolts are added, the clamping action of the bolts presses the rotating back up flange against the back of the Stub End. The gasket surface of the Stub End then presses against a gasket and another gasket surface providing joints like standard flange joints. […]

العربيةБългарски简体中文繁體中文DanskNederlandsEnglishFrançaisDeutschBahasa IndonesiaItaliano日本語한국어LatinPortuguêsРусскийEspañolதமிழ்ไทยTürkçe