Recently Shipment to Mid Asia Projects

How To Distinguish Inferior Steel Pipe?

What is a steel pipe? Steel pipe is long, hollow tube that are used for a variety of purposes. Steel pipe is made using three main methods: Seamless (extrusion mould), Welded and Casting Mould. The primary benefit of steel pipe is its strength. These pipes don’t crack under most impacts and can operate under high pressure. Under abnormal loads, steel pipe will bend, rather than break. Steel pipe can be used in many different applications including building construction, structural and mechanical uses. There are several different types of steel pipe available for use in various applications. The most common is […]

Recently Shipment to Mid Asia Projects

How to get high quality heat exchanger tubes?

What are heat exchanger tubes? Heat exchange tubes are intended for heating or cooling process fluids, they are for example suitable for closed circuit cooling of electrical equipment using demineralised water and for cooling water soluble oil solutions in quenching tanks. Heat exchanger tubes in an extensive range of austenitic stainless steels, duplex stainless steels, nickel alloys, titanium and zirconium, suitable for all types of heat exchangers, such as seawater coolers, condensers, evaporators, heaters and reheaters. Heat exchanger Tubes are used in all types of process industries. Characteristic requirements are: bead worked weld, fixed lengths and extensive testing. Surface protection: Unless […]

Recently Shipment to Mid Asia Projects

When To Use Flexible Metal Hose?

What is a Flexible Metal Hose? Flexible Metal Hose offers the solution where non-rigid connections for conveying liquids, gases and semi-solids are needed and offer a number of advantages including high strength, resistance to high or low temperature extremes, and corrosion resistance. It helps protect your equipment by absorbing vibrations and noise, connects misaligned rigid piping, connects moving parts of machinery or equipment, and is practical for hooking up frequently moved or dismantled equipment. Types of Flexible Metal Hose? Flexible Metal Hose is manufactured in three basic styles: Corrugated Flexible Metal Hose, Interlocked Flexible Metal Hose, and Square locked Flexible […]

Recently Shipment to Mid Asia Projects

How to get high quality boiler tubes?

What are boiler tubes? Boiler tubes, also called heat exchanger tubes, are seamless, alloyed steel tubes developed for use at extreme temperatures and pressures. They are primarily used in power plants and petrochemical plants and have a lifecycle of up to 25 years. Why use boiler tubes? One of the tubes in a boiler that carry water (water-tube boiler) to be heated by the high-temperature gaseous products ofcombustion or that carry combustion products (fire-tube boiler) to heat the boiler water that surrounds them. Where are boiler tubes used? Boiler tubes are used in: Fire-tube boiler, a type of boiler in which hot gases […]

Recently Shipment to Mid Asia Projects

What are Outlet Pipe Fittings?

What are Outlet Pipe Fittings? Olet pipe fittings (otherwise called Branch Connection Fittings or Outlet fittings) will be fittings which give an outlet from a bigger pipe to a smaller one (or one of a similar size). The fundamental pipe onto which the branch association is welded is generally called the Run or Header size estimate. The pipe to which the branch association or connection gives a channel is normally called the Branch or Outlet size. Branch associations are in all sizes, sorts, bores, and classes, in an extensive variety of stainless steel, chrome-moly, and different amalgams alloys. Different types of […]

Recently Shipment to Mid Asia Projects

When to use lap joint flange?

What is a lap joint flange? A Lap Joint Flange is a two piece device that is much like a weld-neck flange but also like a loose slip-on flange. One piece is a sleeve called a ‘Stub-end” and is shaped like a short piece of pipe with a weld bevel on one end and a narrow shoulder on the other end called the hub. The hub is the same outside diameter as the raised face (gasket contact surface) of a weld neck flange. The thickness of the hub is normally about ¼” to 3/8″. The back face of the hub […]

Recently Shipment to Mid Asia Projects

When to use a spectacle blind flange?

What are spectacle blind flanges? Spectacle blind flanges – also known as figure-8 blind flanges – are generally pieces of metal. Spectacle blind flange cut to fit between two pipe flanges and usually sandwiched between two gaskets. A spectacle blind is often made from two metal discs that are attached to each other by a small section of steel. The shape is similar to a pair of glasses or “spectacles” – hence the name spectacle blind. One end of the blind will have an opening to allow flow through the pipe during operation and the other end is solid to block […]

Recently Shipment to Mid Asia Projects

What is the difference between lateral tee and True WYE?

Sometimes the angle between the pipe and the main pipe is not 90 degrees, it may be 45° or other degrees, then we should use a lateral pipe fitting to design it.  Type of the lateral pipe fittings: Lateral pipe fittings have two types: lateral tee and latrolet (also called Lateral Outlet). The lateral tee’s shape is like a pipe tee, the butt welding lateral tees are made from steel pipes or forgings, the manufacturing standard is ASME B16.9. there are also the forged lateral tee produced refer to ASME B16.11,the ends are socket welding and threaded. ANSI/ASME B16.11 Forged Steel Lateral Tee dimensions: 1/4″ to 4″ class 2000 […]

Recently Shipment to Mid Asia Projects

How to get high quality steel pipes?

What are steel pipes? Steel pipes are long, hollow tubes that are used for a variety of purposes. They are produced by two distinct methods which result in either a welded or seamless pipe. In both methods, raw steel is first cast into a more workable starting form. It is then made into a pipe by stretching the steel out into a seamless tube or forcing the edges together and sealing them with a weld. The first methods for producing steel pipe were introduced in the early 1800s, and they have steadily evolved into the modern processes we use today. Each […]

Recently Shipment to Mid Asia Projects

Difference Between A Pipe Elbow And A Pipe Bend

What is a pipe bend? A pipe bend is the generic term for what is called in piping as an “offset” – a change in direction of the piping. A bend is usually meant to mean nothing more than that there is a “bend” – a change in direction of the piping (usually for some specific reason) – but it lacks specific, engineering definition as to direction and degree. Bends are usually custom-made (using a bending machine) on site and suited for a specific need. Pipe bends typically have a minimum bending radius of 1.5 times pipe radius (R). If this bending […]

العربيةБългарски简体中文繁體中文DanskNederlandsEnglishFrançaisDeutschBahasa IndonesiaItaliano日本語한국어LatinPortuguêsРусскийEspañolதமிழ்ไทยTürkçe