Short Description

Model No.: F316-SW-Weldolet-DN80-X-DN40-Class-3000-Sch40

China Weldolet Manufacturer www.pipelinedubai.com offers MSS SP-97 ASTM A182 F316 SW Weldolet, DN80 X DN40, Class 3000, Sch40.

Request a quote Share

Key Specifications / Features

Type: Weldolet
Material: F316
Standard: MSS SP-97
Wall Thickness: SCH 40
Size: 3 Inch X 1 1/2 Inch
Rate: Class 3000
Ends: SW

Weldolets are the most common of all branch connections, and are welded onto the outlet pipe. The ends are bevelled to facilitate this process, and therefore the weldolet is considered a butt-weld fitting. Weldolet’s are designed to minimize stress concentrations and provide integral reinforcement.

20170603092617 16720 - MSS SP-97 ASTM A182 F316 SW Weldolet DN80 X DN40 Class 3000 Sch40
A pipe weldolet makes a 90° branch connection and – comes in full size or reducing for a straight piece of pipe. A weldolet is designated by the run length by the branch length. For example a 1-inch weldolet on a 1-inch pipe would be a 1 X 1 Weldolet. A weldolet is designed to minimize stress concentrations and provide integral reinforcement without the need for reinforcing the weld.

Type 316 Stainless Steel Composition:

SteelGrade Chemical Composition Others Mechanical Properties, min
    Elongation, % (G.L.: 2in or 50 mm) Hardness Test Max.
  C Si. Mn P (max) S (max) Ni Cr Mo   Tensile Strength 
min. Ksi (Mpa)
Yeild Point 
min Ksi (Mpa)
Full section 
Specimen
Strip 
Specimen
Round 
Specimen
Brinell Rockwell
                          t= 6/16in t=5/16in      
316 <=0.08 <=0.75 <=2.00 0.04 0.03 11.00~14.00 16.00~18.00 2.00~3.00 75(515) 30(205) 35 35 56t +17.50 28 192 B 90
316 H 0.04 <=0.10 <=0.75 <=2.00 0.04 0.03 11.00~14.00 16.00~18.00 2.00~3.00 75(515) 30(205) 35 35 56t +17.50 28 192 B 90
316 L <=0.035 <=0.75 <=2.00 0.04 0.03 10.00~15.00 16.00~18.00 2.00~3.00 70(485) 25(170) 35 35 56t +17.50 28 192 B 90
316 N <=0.08 <=0.75 <=2.00 0.04 0.03 11.00~14.00 16.00~18.00 2.00~3.00 N: 0.10~0.16 80(550) 35(240) 35 35 56t +17.50 28 192 B 90
316 LN <=0.035 <=0.75 <=2.00 0.04 0.03 10.00~15.00 16.00~18.00 2.00~3.00 N: 0.10-0.16 75(515) 30(205) 35 35 56t +17.50 28 192 B 90

20171206104702 80405 - MSS SP-97 ASTM A182 F316 SW Weldolet DN80 X DN40 Class 3000 Sch40

  • Outlet
    Nominal Pipe Size
    Face to Crotch (L)
    Standard (SCH40S) XS (SCH80S) SCH160
    Réduit Egal Réduit Egal Réduit Egal
    1/8″ 16 16
    1/4″ 16 16
    3/8″ 16 19
    1/2″ 19 19 19 19 28 28
    3/4″ 22 22 22 22 32 32
    1″ 27 27 27 27 38 38
    1 1/4″ 32 32 32 30 44 44
    1 1/2″ 33 33 33 32 51 51
    2″ 38 38 38 38 55 55
    2 1/2″ 41 41 41 41 62 62
    3″ 44 44 44 44 73 73
    3 1/2″ 48 51 48 51
    4″ 51 51 51 51 84 84
    5″ 57 57 57 57 94 94
    6″ 60 60 78 78 105 105
    8″ 70 70 99 99
    10″ 78 78 94 89
    12″ 86 86 103 100
    14″ 89 89 100 105
    16″ 94 94 106 113
    18″ 97 103 111 119
    20″ 102 117 119 127
    24″ 116 137 140 140

    The dimensions are in millimeters
    Source : MSS SP-97 – 2016

Request a quote

Subject:

Products Related to MSS SP-97 ASTM A182 F316 SW Weldolet DN80 X DN40 Class 3000 Sch40