ASME B16.5 ASTM B366 UNS N02200/UNS N02201 CON RED DN100-DN40 SCH80

Type: UNS N02200 CON RED
Material: Nickel 200/Nickel 201 (UNS N02200/UNS N02201) Round Bar
Size: 4″ – 1-1/2″ (DN100-DN40)
Wall Thickness: SCH80
Ends: CNC

STANDARD	UNS	WERKSTOFF NR.	BS	AFNOR	JIS	GOST	EN
Nickel 200	N02200	2.4066	NA 11	N-100M	NW 2200	НП-2	Ni 99.2
Nickel 201	N02201	2.4068	NA 12	–	NW 2201	НП-2	LC-Ni 99

Chemical Composition, % of Inconel 600 (UNS N06600/Alloy 600)

Nickel 200 (UNS N02200)	99.0 min	.40 max	.25 max	.15 max	.35 max	.01 max	.35 max
	NI	FE	CU	C	MN	S	SI
Nickel 201 (UNS N02201)	99.0 min	.40 max	.25 max	.02 max	.35 max	.01 max	.35 max

Nickel 200 and Nickel 201 are solid solution strengthened, commercially pure wrought materials. Typically, the elemental restrictions of both alloys are combined into one, dual-certified chemistry resulting in a single alloy with the desired characteristics of both alloys. Applications where Nickel 200/201 can be used include chemical processing and storage, synthetic fiber production, and processes where sodium hydroxide and fluorine is used. Other applications include aerospace and defense as well as food processing. Nickel 200/201 has exceptional resistance to caustic alkalies at various temperatures and concentrations.

When operating temperatures are expected to exceed 600°F, carbon content becomes critical. The lower carbon content of Nickel 201 makes the material resistant to graphitization and therefore less subject to embrittlement. Pressure vessels and vessel components can be constructed from Nickel 201 according to the ASME Boiler and Pressure Vessel Code, Section VIII, Division 1 for use up to 1250°F.

Resistance to Corrosion

Both Nickel 200 and 201 offer corrosion resistance in reducing and neutral media as well as in oxidizing atmospheres provided that the oxidizing media allows the formation of a passive oxide film. This oxide film accounts for the materials excellent resistance in caustic environments.

Fabrication and Heat Treatment

All hot working and cold working practices can be utilized when shaping Nickel 200/201. Hot working temperatures should be between 1200°F and 2250°F with heavy forming to be performed at temperatures

above 1600°F. Annealing should be performed at a temperature between 1300°F and 1600°F. Care should be taken when choosing the anneal temperature and time-at-temperature for this can greatly influence the mechanical properties and structure of the material.