Short Description

Model No.: 316L-SORF-Flange-DN150-Class150

China Slip On Flange Manufacturer www.pipelinedubai.com offers ASME B16.5 A182 316L Slip On Flange RF, DN150, Class150.

Request a quote Share

Key Specifications / Features

Type: Slip On Flange
Material: A182 F316L
Pressure: 150#
Size: DN150 (5″)
Standard: ASME B16.5
Ends: Raised Face

Chemical Composition and Mechanical Property for 316L

Steel Grade

Chemical Composition

Mechanical Performance

C(Max)

Si(Max)

Mn(Max)

P(Max)

S(Max)

Ni

Cr

N(Max)

Mo

Tensile Strength
(Min)

Yield Strength
(Min)

Mpa

Mpa

316L

0.03

0.75

2.00

0.045

0.03

10.0–14.0

16.0–18.0

0.1

2.00–3.00

485

170

2018103192541560824 1 - ASME B16.5 A182 316L Slip On Flange RF DN150 Class150

Flange Dimensions & Approximate Masses
ANSI, ASME, ASA, B16.5 150lb/sq.in. SLIP ON FLANGE RF / FF
ø D b g m J h k Holes l Kg.
1/2″ 88,9 11,1 34,9 30,2 22,3 15,9 60,3 4 15,9 0,400
3/4″ 98,4 12,7 42,9 38,1 27,7 15,9 69,8 4 15,9 0,700
1″ 107,9 14,3 50,8 49,2 34,5 17,5 79,4 4 15,9 0,800
1 1/4″ 117,5 15,9 63,5 58,8 43,2 20,6 88,9 4 15,9 1,100
1 1/2″ 127,0 17,5 73,0 65,1 49,5 22,2 98,4 4 15,9 1,400
2″ 152,4 19,0 92,1 77,8 62,0 25,4 120,6 4 19,0 2,200
2 1/2″ 177,8 22,2 104,8 90,5 74,7 28,6 139,7 4 19,0 3,600
3″ 190,5 23,8 127,0 107,9 90,7 30,2 152,4 4 19,0 4,100
3 1/2″ 215,9 23,8 139,7 122,2 103,4 31,7 177,8 8 19,0 5,200
4″ 228,6 23,8 157,2 134,9 116,1 33,3 190,5 8 19,0 5,600
5″ 254,0 23,8 185,7 163,6 143,8 36,5 215,9 8 22,2 6,300
6″ 279,4 25,4 215,9 192,1 170,7 39,7 241,3 8 22,2 7,500
8″ 342,9 28,6 269,9 246,1 221,5 44,4 298,4 8 22,2 12,600
10″ 406,4 30,2 323,8 304,8 276,3 49,2 361,9 12 25,4 18,500
12″ 482,6 31,7 381,0 365,1 327,1 55,6 431,8 12 25,5 28,000
14″ 533,4 34,9 412,7 400,0 359,1 57,1 476,2 12 28,6 36,000
16″ 596,9 36,5 469,9 457,2 410,5 63,5 539,7 16 28,6 46,000
18″ 635,0 39,7 533,4 504,8 461,8 68,3 577,8 16 31,7 50,000
20″ 698,5 42,9 584,2 558,8 513,1 73,0 635,0 20 31,7 64,000
22″ 749,3 46,0 641,2 609,6 564,4 79,4 692,1 20 34,9 72,000
24″ 812,8 47,6 692,1 663,6 615,9 82,5 749,3 20 34,9 89,000

NOTE:
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in ‘Thickness’ (C) and ‘Length through Hub’ (Y1), (Y3).
2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees.
3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub.
4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C).
5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer’s option.

Request a quote

Subject:

Products Related to ASME B16.5 A182 316L Slip On Flange RF DN150 Class150