Short Description

Model No.: GOST-33259-2015-904L-PL-Flange-DN100-1.6-MPa

China Plate Flange Manufacturer www.pipelinedubai.com offers 100-16-01-1-B GOST 33259-2015 904L PL Flange, DN100, 1.6 MPa.

Request a quote Share

Key Specifications / Features

Type: GOST PL Flange
Material: 904L
Standard: GOST 33259-2015
Pressure: PN16
Size: 4″ (DN100)

20181128044854 98488 - 100-16-01-1-B GOST 33259-2015 904L PL Flange DN100 1.6 MPa

Composition ranges of grade 904L stainless steels

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

Cu

904L

min.

max.

0.02

2

1

0.045

0.035

19

23

4

5

23

28

1

2

Mechanical properties of grade 904L stainless steels

Grade

Tensile Strength (MPa) min

Yield Strength 0.2% Proof (MPa) min

Elongation (% in 50mm) min

Hardness

Rockwell B (HR B)

Brinell (HB)

904L

490

220

36

70-90 typical

150


Flange GOST 33259 type 01, pressure PN 6/10

20181127226478411075 - 100-16-01-1-B GOST 33259-2015 904L PL Flange DN100 1.6 MPa
Diameter conditional (DN), mm Outer diameter (D), mm Diameter of spacing (D0), mm Diameter internal (dB), mm Flange thickness (b), mm Size of fastener (d0), mm Number of mounting holes (n), pcs Weight of one flange, kg
15 80/95 55/65 nineteen 10/10 11/14 4/4 0.3 / 0.5
20 90/105 65/76 nineteen 12/12 11/14 4/4 0.5 / 0.7
25 100/115 75/85 nineteen 12/12 11/14 4/4 0.6 / 0.9
32 120/135 90/100 39 13/14 14/18 4/4 1.1 / 1.4
40 130/145 100/110 46 13/15 14/18 4/4 1.2 / 2
50 140/160 110/125 59 13/15 14/18 4/4 1.3 / 2.1
65 160/180 130/145 78 13/17 14/18 4/4 1.6 / 2.8
80 180/195 150/160 91 15/17 18/18 4/4 2.4 / 3.2
100 205/215 170/180 110 15/19 18/18 4/8 2.8 / 4
125 235/245 200/210 135 17/21 18/18 8/8 3.8 / 5.4
150 260/280 225/240 161 17/21 18/22 8/8 4.4 / 6.6
200 315/335 280/295 222 19/21 18/22 8/8 5.9 / 8
250 370/390 335/350 273 20/23 18/22 12/12 7.6 / 10
300 435/440 395/400 325 20/24 22/22 12/12 10.2 / 13
350 485/500 445/460 377 22/24 22/22 12/16 12.6 / 16
400 535/565 495/515 426 24/26 22/26 16/16 15.2 / 21
500 640/670 600/620 530 25/28 22/26 16/20 19/28
600 755/780 705/725 630 25/31 26/30 20/20 26/40
800 975/1010 920/950 820 27/37 30/33 24/24 46/79
1000 1175/1220 1120/1160 1020 31/43 30/33 28/28 64/118

The dimensions in the table correspond only to the flanges of GOST 33259 type 01 
with sealing execution B

Flange GOST 33259 type 01, pressure PN 16/25

20181127226478411075 - 100-16-01-1-B GOST 33259-2015 904L PL Flange DN100 1.6 MPa

Diameter conditional (DN), mm Outer diameter (D), mm Diameter of spacing (D0), mm Diameter internal (dB), mm Flange thickness (b), mm Size of fastener (d0), mm Number of mounting holes (n), pcs Weight of one flange, kg
15 95/95 65/65 nineteen 12/14 14/14 4/4 0.6 / 0.7
20 105/105 75/75 nineteen 14/16 14/14 4/4 0.9 / 1
25 1115/115 85/85 nineteen 16/16 14/14 4/4 1.1 / 1.2
32 135/135 100/100 39 16/18 18/18 4/4 1.5 / 1.7
40 145/145 110/110 46 19/19 18/18 4/4 2/2
50 160/160 125/125 59 19/21 18/18 4/4 2.6 / 2.7
65 180/180 145/145 78 21/21 18/18 4/8 3.4 / 3.2
80 195/195 160/160 91 21/23 18/18 4/8 3.7 / 4.1
100 215/230 180/190 110 23/25 18/22 8/8 4.7 / 6
125 245/270 210/220 135 25/27 18/26 8/8 6.3 / 8.2
150 280/300 240/250 161 25/27 26/26 8/8 7.8 / 10
200 335/360 295/310 222 27/29 22/26 12/12 10 / 13.3
250 405/425 355/370 273 28/31 28/30 12/12 14.5 / 19
300 460/485 410/430 325 30/32 28/30 12/16 18/23
350 520/550 470/490 377 30/38 30/33 16/16 23/34
400 580/610 525/550 426 34/40 34/33 16/16 31/45
500 710/730 650/660 530 44/48 44/39 20/20 57/67
600 840/840 770/770 630 45/49 45/39 20/20 80/91
800 1020/1075 950/990 820 49/63 49/45 24/24 104/182
1000 1255 / – 1170 / – 1020 58 / – 58 / – 28 / – 179 / –

The dimensions in the table correspond only to the flanges of GOST 33259 type 01 
with sealing execution B

The control group according to GOST R 33259

On the flange marking in accordance with GOST 33259 there are Roman numerals I, II, III, IV, V. These figures indicate to which control group the flange belongs. Below is a table with a detailed description. 

Control group Batching conditions Type and scope of testing Delivery characteristics Applicability
I Billets of one steel grade Chemical analysis – each melt Chemical composition For flanges PN ≤ 2,5 DN ≤ 300 for liquid working media not related to hazardous substances
II Billets of the same steel grade, jointly heat treated Chemical analysis – each melt. 
Hardness measurement – 5% batch, 
but not less than 5 pcs. 
IWC on request
Chemical composition. 
Hardness
For flanges PN ≤ 6 all DN and for flanges PN ≤ 16 DN ≤ 300 for non-hazardous media
III Billets of the same steel grade, heat-treated in the same mode Chemical analysis – each melt. 
Hardness measurement – each billet. 
Unbrakable control – 
at the request of the customer. 
IWC on request
Chemical composition. 
Hardness
For flanges PN ≤ 25 all DNs for non-hazardous media. 
For flanges PN ≤ 6 DN ≤ 150 
for liquid working media related to hazardous substances
IV Chemical analysis – each melt. 
Hardness measurement – each billet. 
Mechanical properties – 1% of each set, 
but not less than 2 pcs. 
Non-destructive testing – each piece. 
IWC on request
Chemical composition. 
Hardness. 
Mechanical properties (yield strength, relative narrowing, impact strength). 
Resistance to ICC
For flanges PN ≤ 160 all DN for all media
V Individually each blank Chemical analysis – each melt. 
Hardness measurement – each billet. 
Mechanical properties – each billet. 
Non-destructive testing – each piece. 
IWC on request
For flanges PN> 160 all DN for all media

Installation scheme of the flat flange to the pipe

20181127228581806094 - 100-16-01-1-B GOST 33259-2015 904L PL Flange DN100 1.6 MPa

It is allowed to chamfer the weld with an angle of (50 ± 5) °

Request a quote

Subject:

Products Related to 100-16-01-1-B GOST 33259-2015 904L PL Flange DN100 1.6 MPa

  • No related articles